Selection by parameters

Veichi Servo Drives

Found 245 products
Veichi ×
Скинути фільтри

Veichi Servo Drives and Motors: when this kilowatt beats Delta or Schneider

VEICHI Industrial has built servo equipment since 2007. Our catalogue holds the full line: SD600, SD700, SD710 drives and VM7 servo motors from 11 to 200 kW. Veichi's strength in servo is high-power ratings for heavy machines (presses, extruders, winders, cutting lines) at a price well below European equivalents, with comparable positioning repeatability. Where certified functional safety or deep integration into a European controller is required, we honestly recommend another brand; for typical motion and dosing tasks, Veichi gets the job done.

Before the order we ask three things: torque and speed at the shaft, the control interface (pulse/direction, analog, or fieldbus — EtherCAT, CANopen, RS485), and whether you need a standalone drive for your motor or a ready motor+drive servo kit. 24-month warranty, delivery across Ukraine in 1–3 days.

Veichi Servo Drive Series

SD600: Compact Drive for Basic Positioning

24 models, 0.2–7.5 kW. RS-485 and CANopen interface. We ship this for simple dosing, feeding and rotary-table tasks where fieldbus control without tight cycle demands is enough. The budget entry into Veichi servo: drives in this series start from 9342 UAH.

SD700: Core Series with Interface Choice

45 models, 0.2–37 kW. The workhorse of the line. One rating comes in three interface builds: SD700-…-PA (pulse/direction step-dir + Modbus RS485) for the classic PLC link, SD700-…-SA (standard build, analog control), and SD700-…-EA (EtherCAT) for fast multi-axis lines. If the machine has several coordinated synchronous axes, choose EA; if it is a single axis driven by PLC pulses, choose PA.

SD710: Smallest Frame for Light Axes

6 models, 0.2–2.0 kW, pulse interface. The smallest drive for light axes: markers, dosers, small feeders. We ship it when the motor is small and cabinet space is tight.

VM7 Servo Motors: High-Power 11–200 kW

57 models, 11–200 kW, rated torque from 175 to over 2390 N·m, rated speed 600 rpm. Feedback is a 23-bit absolute optical encoder, so position is retained without a homing pass after power-off. These are motors for heavy machines: presses, extruders, large winders, forging-press equipment. We size by torque and shaft speed, not by "kilowatts" — for servo that distinction matters.

VM7 Servo Kits: Motor + Drive, Turnkey

113 ready "VM7 servo motor + matched drive" kits at 11–200 kW with a pulse + RS485 interface. Choose this when you would rather not verify encoder, cable and rating compatibility yourself: the kit pairs the motor with a drive sized for its torque, parameters already matched. It is the fastest way to bring an axis online without selection errors.

Which Veichi Build to Choose?

Standalone drive for an existing motor up to 37 kW: see the SD700 series and pick the PA / SA / EA interface for your control system. A high-power servo motor for a heavy machine: VM7 servo motors. To avoid compatibility mistakes, take a ready VM7 servo kit (motor + drive). The full brand servo range is on the Veichi Servo Drives page, and other brand equipment is in the Veichi section. Unsure about torque and interface — send us the machine parameters and we will select together.

Frequently Asked Questions

What is the difference between the PA, SA and EA interfaces on Veichi SD700 drives?

PA is pulse/direction (step-dir) plus Modbus RS485 — the classic single-axis PLC link. SA is the standard build with analog control. EA is EtherCAT for fast multi-axis lines with synchronization. The same SD700 rating is available in all three builds, so you pick by your control system, not by changing power.

How do I select a VM7 servo motor for my machine?

Selection is by rated torque (N·m) and shaft speed (rpm), not by kilowatts. Tell us the required torque, speed and load type, and we will match a VM7 motor with a suitable drive. Our VM7 servo motors cover 11–200 kW with torque up to over 2390 N·m.

What is a Veichi servo kit and why use one?

A servo kit is a ready pair — a VM7 servo motor plus a drive sized for its torque — with encoder, cable and rating compatibility already matched by the manufacturer. It is chosen to skip manual compatibility checks and bring an axis online without selection errors. We stock 113 ready kits at 11–200 kW with a pulse + RS485 interface.

Can I buy just the drive for an existing motor?

Yes. SD600 (0.2–7.5 kW, RS-485/CANopen), SD700 (0.2–37 kW, PA/SA/EA) and SD710 (0.2–2 kW) drives are sold separately. The key is matching your motor's torque, encoder and voltage to the drive — we help with this before the order.

What warranty covers Veichi servo drives and motors?

All Veichi servo equipment carries an official 24-month warranty from the date of sale. Warranty and post-warranty service is provided within Ukraine through our service centre.

Are Veichi servo drives in stock and how fast is delivery?

We keep popular SD600/SD700 drives and VM7 motors in stock. Delivery across Ukraine is typically 1–3 days. Before shipping we confirm torque, interface and configuration with you so you receive exactly the build your machine needs.