SD710-3R3A-PA Veichi SD710 servo drive 3.3 A, 220 V, pulse (step/dir) + RS485
Є в наявності
sku: SD710-3R3A-PA
Є в наявності
9 720 UAH
Brand: Veichi
Series: SD710
Power: kW
Servo type: Servo drive
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Description
- Documentation
- Reviews (0)
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing Delta VFD-EL with Veichi AC10: Migration Guide
An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai...
Go to
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
This page contains information about
Veichi SD710 servo drive 3.3 A, 220 V, pulse (step/dir) + RS485 ( SD710-3R3A-PA )
with a detailed description of the technical characteristics
.
You can download
documentation for SD710-3R3A-PA, series SD710 from manufacturer Veichi
.
Buy SD7103R3APA
and seek technical advice.
Our Engineers will help you choose and buy
SD710-3R3A-PA only high quality at affordable prices. Guarantee.
SD710-3R3A-PA
