Selection by parameters
brand
current, A
—

Veichi Soft Starters

Found 27 products
Veichi ×
Скинути фільтри

Veichi SS70 soft starters: a budget line from 5.5 to 630 kW

Veichi is a Chinese drives manufacturer whose soft starter offering is a single series, the SS70. We stock 27 positions, current from 15 to 1100 A, power 5.5-630 kW at 400 V. Supply is 380 V, so the series is built exactly for our grid with no transitional versions.

We pick the SS70 when budget is tight and the duty is ordinary: pump, fan, conveyor, mid-power compressor. On price it is the most affordable soft starter line we carry across the whole power range. The SS70-008-40 at 22 A costs UAH 24,525, the SS70-110-40 at 200 A is UAH 98,820, and the larger frames up to 630 kW come to order. For comparison, European units at the same current usually cost one and a half to two times more.

When the SS70 is the wrong choice

We will be blunt. If the start is genuinely hard (crusher, ball mill, piston compressor with high breakaway torque), look at the Danfoss MCD500 or Schneider ATS48, which offer adaptive torque control. If the unit has to report into SCADA over a fieldbus, a European line is again the better call. The SS70 is strong in standard duties needing reliable ramping without surplus features.

What we ask before quoting

Nameplate motor current, load type, starts per hour, cabinet temperature. That last one gets forgotten most often, which is a shame: above 40 °C inside the enclosure derating kicks in, and the frame size has to go up after the fact, once the equipment is already bought. We hold the series manual and catalogue and send them with the invoice. The whole series sits on the SS70 page, with everything else in the soft starter catalogue.

Frequently Asked Questions

What power does the Veichi SS70 handle?

From 5.5 to 630 kW at 400 V, current from 15 to 1100 A. We stock 27 positions in this series. We size by nameplate motor current, because real figures often differ from machine documentation by 5-15%.

How much does a Veichi soft starter cost?

The SS70-008-40 at 22 A costs UAH 24,525. The SS70-055-40 at 110 A is UAH 57,690, and the SS70-110-40 at 200 A comes to UAH 98,820. Larger frames up to 630 kW are brought in to order, with pricing from a manager. This is the most affordable soft starter line in our catalogue.

Veichi, Danfoss or Schneider, which is better?

It depends on the duty, and we say so openly. For a standard pump or fan the SS70 does the same job for less money. For a crusher, mill or piston compressor you need adaptive torque control, which the SS70 lacks, so take a Danfoss MCD500 or Schneider ATS48.

What supply voltage does the SS70 accept?

380 V. The series is built precisely for the Ukrainian grid, with no transitional versions for 480 or 690 V. If your network differs, look at European lines with a wider range.

Does the SS70 replace a Veichi VFD?

No. A soft start removes the inrush during acceleration, after which the motor runs straight off the mains at 50 Hz. It cannot vary speed or hold pressure with a PID loop. Veichi has a separate drives range if genuine speed control is what you need.

Where do I get the SS70 manual?

We hold the series manual and catalogue in English and send them with the invoice, before payment. If you need starting parameters for your machine, tell us the load type plus the nameplate motor current.