SD600A-S2-R20 SD600 Series 0.2KW
Є в наявності
sku: SD600A-S2-R20
Є в наявності
9 238 UAH
Brand: Veichi
Series: SD600
Power: 0.2 kW
servo_type: servoset
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| Brand | Veichi |
| Series | SD600 |
| sku | SD600A-S2-R20 |
| Power | 0.2 kW |
| Current | 1.60 A |
| Number of phases/input voltage | 1-ф/220В V |
| DI | 9 |
| AI | 2 |
| DO | 6 |
| AO | 0 |
| Encoder resolution | 2500 имп/об |
| Structure | RS-485 |
| rezistor | Встроенный |
| Dimensions | 139.5+75х62х162 |
| Programming | VeichiSoft |
| servomotor | {'SMM06-2TR10-U1NL5','SMM06-2TR20-U1NL5'} |
| revs | 3000 |
| servo_type | servoset |
Documents by language
Ukrainian / English / Russian
EN English
UA Ukrainian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Олег К.
Брав цей сервопривід Veichi SD600A на свій невеликий фрезерний ЧПУ верстат. Різниця відчутна, верстат тепер працює помітно швидше і точніше. Особливо порадували плавні рухи без ривків, 0.2 кВт потужності мені для моєї роботи за очі вистачає. Мотор 3000 об/хв, та й енкодер на 2500 імпульсів дає дуже хорошу деталізацію. Підключив без проблем, живлення 220В, та й сам привід компактний (139.5х62х162), вліз у шафу керування без танців з бубном. Програма VeichiSoft інтуїтивно зрозуміла, багато часу на налаштування не витратив. Вважаю, що за цю ціну, Veichi SD600 – дуже вдалий вибір. Я задоволений.
To leave a review, please, log in.
This page contains information about
SD600 Series 0.2KW ( SD600A-S2-R20 )
with a detailed description of the technical characteristics
.
You can download
documentation for SD600A-S2-R20, series SD600 from manufacturer Veichi
.
Buy SD600AS2R20
and seek technical advice.
Our Engineers will help you choose and buy
SD600A-S2-R20 only high quality at affordable prices. Guarantee.
SD600A-S2-R20
