Skip to content
Selection by parameters

VFDs 30 kW

Found 197 products
30 ×
Скинути фільтри
B2B Сервіс

30 kW VFD: what we ship it for

30 kW units we ship for 30 kW 380 V motors with nominal current around 60 A. Typical customer this year: screw compressors 4-5 m³/min. Village water supply, booster stations. Supply/exhaust units for production shops. Conveyors over 30 meters long. Crushers, shredders. On 22 kW these jobs do not hold: a compressor with 150-180 A inrush exceeds the IGBT limit, the drive trips on OC within 0.5 seconds.

From the grid: 3-phase 380 V always (exceptions at 660 V like INVT GD350-030G-6 for industrial sites with special supply, but rare). Rated draw 60 A, breaker 80 A C-curve, cable 16 mm² copper up to 30 m, recalc beyond that. Veichi AC70-T3-030G/037P per datasheet holds 150% for 60 s (G mode) and has P mode for pump jobs with 110% overload. INVT GD200A-030G/037P gives the same: G/P switched from the keypad, not from the cabinet.

Which model we ship most often

From daily stock: Veichi AC70-T3-030G/037P (mid-tier, in Kyiv monthly, our main product in this band). INVT GD200A-030G/037P (European feature equivalent, sensorless vector). Schneider ATV630 and ATV930 when the customer wants Europe and accepts 7-14 days. Delta VFD300C43E, Mitsubishi FR-F840-00620-E2-60: ship to order from Taiwan and Japan warehouses. ABB ACS880-01-061A-3 we ship only when the site is already on ABB. Veichi SI23-D5-030G-A (solarized, MPPT 200-820 V) we ship for 30 kW solar pump stations without batteries.

Before paying we ask. First: load type G or P? Crusher, compressor, shock-load conveyor (G); pump or fan (P). This decides whether we ship 30 kW in G mode or 22 kW in P. Second: braking resistor. For a 30 kW centrifuge the BR draws 7-10 kW, mandatory question. Third: cable length to motor. Over 30 m a du/dt output filter is needed; over 100 m a sine filter. Fourth: IP rating. Base drive is IP20; for dusty production we ship in a separate IP54 cabinet. 2-year warranty, 1-3 day delivery from our Kyiv warehouse.

Manufacturers in our stock

  • Veichi (AC70, AC310, SI23): mid-tier and solarized
  • INVT (GD20, GD27, GD200A, GD350): universal mid-tier
  • Schneider Electric (ATV630, ATV930): Europe
  • ABB (ACS880, ACQ80): premium, ship to order
  • Delta Electronics (VFD-C2000, VFD-CP2000): Taiwan
  • Mitsubishi Electric (FR-F, FR-A): Japan

Frequently Asked Questions

Which motor is a 30 kW VFD selected for?

A 30 kW VFD is selected for a three-phase electric motor with a rated power of 30 kW when the motor current does not exceed the drive rated current. Before ordering, check the motor nameplate: power, voltage, current, and wiring diagram.

What input voltage is required for a 30 kW VFD?

The input voltage depends on the site supply and the motor. For a single-phase 220 V supply, choose a 220 V input model if it is available for this power. Industrial motors usually require a 3-phase 380 V VFD.

Do I need extra power reserve for a 30 kW VFD?

For pumps and fans, selecting by the motor rated power and current is often enough. For heavy starts, conveyors, compressors, mixers, or frequent acceleration cycles, allow extra current reserve or move to the next power size.

Where are 30 kW VFDs used?

30 kW VFDs are used to control the speed of pumps, fans, conveyors, machines, and other equipment with asynchronous motors. The exact application depends on load torque, duty cycle, and installation conditions.

How can I quickly choose the right model?

Send a motor nameplate photo or provide the power, voltage, rated current, number of phases, and load type. A Chastotnik.ua manager will select a compatible VFD, check availability, and advise on basic startup parameters.