FR-D720S-100SC-EC Variable Frequency Drive FR-D 2.2kW 1-ф/220

FR-D720S-100SC-EC is a Mitsubishi Electric FR-D variable frequency drive rated at 2.2 kW (1-phase 220 V input, 3-phase 220 V output). We use it for a workshop, gate, or small pump running from 220 V when the project needs Mitsubishi hardware, clear diagnostics, and 150% overload headroom.

• Current: 10 A, IP20, maximum frequency 120 Hz.
• What matters: Here the brake module is listed as built in, with RS-485 and basic PID.
• Check before use: Important: from a 220 V single-phase input it gives a 220 V three-phase output, not 380 V. The motor must be wired in delta.

Mitsubishi Electric FR-D: where this series fits

FR-D is a compact entry series for simple drives. Our catalog currently has 9 active items in this series, from 0.7 to 7.5 kW, supply variants 1x220, 3x380, and IP20 enclosures. We use Mitsubishi where price is not the only criterion: service life, readable diagnostics, and Mitsubishi Electric automation compatibility matter.

Typical jobs for FR-D

• Common mechanisms: small conveyors, doors, gates, simple pumps, and fans.
• Selection: first check motor power and current, then load type, motor cable length, and the control method.
• Retrofit note: in older cabinets, replacement without rebuilding terminals and parameters often matters more than the drive price.

FR-D inside the Mitsubishi range

When FR-D is not the right drive

We do not recommend FR-D for a complex positioning line or a drive above 7.5 kW. In those cases INVT or Veichi is often enough, and pump projects should also start from VFDs for pumps.

Our field note

Customers rarely buy Mitsubishi by accident. It is usually a FREQROL replacement, a cabinet with MELSEC/GOT, or a production line where downtime costs more than the price difference. Before payment we ask for a motor nameplate photo and a cabinet diagram. Fewer surprises at startup.