VI30-070-CWH HMI Veichi VI30 Size 7 in
Є в наявності
sku: VI30-070-CWH
Є в наявності
7 782 UAH
brand: Veichi
Series: VI30
Panel type: графическая
Diagonal: 7 inch
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| brand | Veichi |
| Series | VI30 |
| sku | VI30-070-CWH |
| Replacement (If discontinued) | No |
| Panel type | графическая |
| Matrix type | TFT LCD |
| Diagonal | 7 inch |
| Chroma | 65K |
| Width | 800 mm |
| Height | 480 mm |
| number of ports | 3 |
| Interface | RS232, RS485, RS422 |
| Protocol | Modbus RTU/TCP |
| USB port | 1 host USB |
| Additional | ARM 800MHz, 128MB Flash + 128MB DDR3, Ethernet, WiFi, DC24V, 6W, 250 cd/m² |
| Color rendering | Black |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
4.0
out of 5
1 reviews
5
0
4
1
3
0
2
0
1
0
�
Сергій, оператор цеху
Взяли Veichi VI30-070-CWH на один з верстатів. Екран 7 дюймів, яскравий, кольори гарні (65К), все читається легко, навіть коли стоїш трохи збоку. Сенсор відгукується без затримок. Підключили по Ethernet до ПЛК, все одразу працювало. До цього стояв інший бренд, дорожчий, але ця панелька нічим не гірша. Для своїх грошей дуже достойно
To leave a review, please, log in.
SIMILAR VI30-070-CWH GOODS
| Characteristics | ||
|---|---|---|
| brand | Schneider Electric | Delta Electronics |
| Series | ET6 | DOPB |
| Panel type | Сенсорний резистивний | графическая |
| Diagonal, inch | 7 | 7 |
This page contains information about
HMI Veichi VI30 Size 7 in ( VI30-070-CWH )
with a detailed description of the technical characteristics
.
You can download
documentation for VI30-070-CWH, series VI30 from manufacturer Veichi
.
Buy VI30070CWH
and seek technical advice.
Our Engineers will help you choose and buy
VI30-070-CWH only high quality at affordable prices. Guarantee.
VI30-070-CWH
