Skip to content

VI20-156S-FE HMI Veichi VI20 Size 15.6in

Є в наявності
VI20-156S-FE HMI Veichi VI20 Size 15.6in
Клікніть для збільшення
Veichi
Є в наявності
38 600 UAH
brand: Veichi
Series: VI20
Panel type: графическая
Diagonal: 15.6 inch

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Interested in this product?
    Our specialist will advise you.
  • Write ⤵
    Telegram VIA TELEGRAM
    Write ⤵
    Viber VIA VIBER
  • Characteristics
  • Documentation
  • Reviews (1)
brand Veichi
Series VI20
sku VI20-156S-FE
Replacement (If discontinued) No
Panel type графическая
Matrix type TFT LCD
Diagonal 15.6 inch
Chroma 65K
Width 1920 mm
Height 1080 mm
number of ports 6
Interface RS232/485/422, RS485/422
Protocol Modbus RTU/TCP
USB port USB Slave/Host 2.0
Additional CPU: 1G ARM Cortex-A8, 256MB Flash+512MB DDR3, 2×Ethernet, Micro SD, Metal shell, DC24V (18-28V), IP65
Color rendering Black
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing Delta VFD-EL with Veichi AC10: Migration Guide An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai... Go to Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to
Product Reviews
1
5 1
4 0
3 0
2 0
1 0
І
Ігор К.
★ ★ ★ ★ ★
22.08.2024

We took this Veichi VI20-156S-FE panel for a new project. The 15.6 inch size with a 1920x1080 resolution makes the image sharp, and all diagrams and control elements look very good. For monitoring a production line, it is just what is needed. There are a bunch of ports, including two Ethernet, RS232/485, so connecting to various PLCs is not a problem, Modbus works without any complaints. The 1G ARM Cortex-A8 processor handles everything quickly, doesn't freeze, and there is enough memory too. The metal housing feels reliable, IP65 as claimed. For its price, this is a really good panel, especially considering that Veichi provides normal support and software, and everything is even available in Ukrainian. Instead of expensive analogs, it fit in just fine.

This page contains information about HMI Veichi VI20 Size 15.6in ( VI20-156S-FE ) with a detailed description of the technical characteristics . You can download documentation for VI20-156S-FE, series VI20 from manufacturer Veichi . Buy VI20156SFE and seek technical advice. Our Engineers will help you choose and buy VI20-156S-FE only high quality at affordable prices. Guarantee. VI20-156S-FE