VI20-070S-F HMI Veichi VI20 Size 7in
Є в наявності
sku: VI20-070S-F
Є в наявності
9 400 UAH
brand: Veichi
Series: VI20
Panel type: графическая
Diagonal: 7 inch
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| brand | Veichi |
| Series | VI20 |
| sku | VI20-070S-F |
| Replacement (If discontinued) | No |
| Panel type | графическая |
| Matrix type | TFT LCD |
| Diagonal | 7 inch |
| Chroma | 24bit |
| Width | 1024 mm |
| Height | 600 mm |
| number of ports | 3 |
| Interface | RS232/485/422, 2×RS485 |
| Protocol | Modbus RTU |
| USB port | USB Slave/Host 2.0 |
| Additional | CPU: 600MHz ARM Cortex-A8, Memory: 128MB Flash+128MB DDR3, LED backlight, DC24V (9-28V), IP65 front panel |
| Color rendering | Black |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Олег П.
Поставили нам цю панельку Veichi на виробництво, екранчик 7 дюймів, яскравий та кольори гарні, (24 біти дають своє діло). З цим тачем працювати приємно, все відгукується миттєво. Наш електрик швидко її підключив по RS485, каже, що проц 600МГц тягне все без проблем. Можна флешку вставляти, що дуже зручно для збору даних. За свою ціну – дуже достойно)
To leave a review, please, log in.
SIMILAR VI20-070S-F GOODS
| Characteristics | ||
|---|---|---|
| brand | Schneider Electric | Delta Electronics |
| Series | ET6 | DOPB |
| Panel type | Сенсорний резистивний | графическая |
| Diagonal, inch | 7 | 7 |
This page contains information about
HMI Veichi VI20 Size 7in ( VI20-070S-F )
with a detailed description of the technical characteristics
.
You can download
documentation for VI20-070S-F, series VI20 from manufacturer Veichi
.
Buy VI20070SF
and seek technical advice.
Our Engineers will help you choose and buy
VI20-070S-F only high quality at affordable prices. Guarantee.
VI20-070S-F
