Skip to content

SISV-10.2K-H(TWIN) Hybrid inverter 10.2kW 1Ф (battery 48V)

Є в наявності
SISV-10.2K-H(TWIN) Hybrid inverter 10.2kW 1Ф  (battery 48V)
Клікніть для збільшення
Veichi
Є в наявності
29 500 UAH
Brand: Veichi
Series: SI
Power supply: 1x220
Power: 10.2 kW
Battery Voltage: 48 V
Max Charge Current: 140 A

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Interested in this product?
    Our specialist will advise you.
  • Write ⤵
    Telegram VIA TELEGRAM
    Write ⤵
    Viber VIA VIBER
  • Characteristics
  • Description
  • Documentation
  • Reviews (2)
Brand Veichi
Series SI
SKU SISV-10.2K-H(TWIN)
Type hybrid_inverter
Power 10.2 kW
Power supply 1x220
Battery Voltage 48 V
Max Charge Current 140 A
Charger Type MPPT
Nominal DC Voltage 360 V
Max DC Voltage 500 V
MPPT Voltage Range 60-450VDC V
Output Voltage Range 190-253VAC V
Efficiency 98.0 %
Dimensions 130x390x500 mm
Weight 14.7 kg
AC Startup Voltage 120-140VAC/180VAC V
AC Input Voltage Range 90-280VAC/170-280VAC V
Frequency Range 49-51 ±1Hz Hz
Max AC Input Current 50 A
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing Delta VFD-EL with Veichi AC10: Migration Guide An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai... Go to Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to
Product Reviews
2
5 1
4 1
3 0
2 0
1 0
С
Сергій В., інженер ВДЕ
★ ★ ★ ★ ★
20.05.2025

We installed the Veichi SISV-10.2K-H(TWIN) at a site where reliable backup was of critical importance. This model has performed well. The MPPT tracker operates precisely, and the 60-450VDC range allows for flexible panel array selection. The 98% efficiency is a very decent figure for a hybrid inverter of this capacity. Communication via RS485/WIFI is also convenient for monitoring. I liked that it is 1-ph/220V, and the max charging current of 140A allows for fast replenishment of the 48V battery. For its price category, Veichi truly offers a quality solution, especially considering their resilience to unstable power grids in Ukraine.

О
Олег К.
★ ★ ★ ★ ★
01.05.2025

I've wanted to install a solar power plant for my house for a long time because the electricity goes out often. I got this Veichi 10.2 kW hybrid inverter. Very satisfied. It has already saved the day several times when there was no power. It switches quickly, the appliances in the house don't even notice. The 48V battery holds up normally. The installation itself is not complicated, the electrician handled it. It's calmer now, no need to worry about the fridge or the computer. And also, it is quite compact, doesn't take up much space)

This page contains information about Hybrid inverter 10.2kW 1Ф (battery 48V) ( SISV-10.2K-H(TWIN) ) with a detailed description of the technical characteristics . You can download documentation for SISV-10.2K-H(TWIN), series SI from manufacturer Veichi . Buy SISV10.2KH(TWIN) and seek technical advice. Our Engineers will help you choose and buy SISV-10.2K-H(TWIN) only high quality at affordable prices. Guarantee. SISV-10.2K-H(TWIN)