SD710-9R5A Economic servo drive 2.0kW, 220V three-phase, 9.5A rated/23.8A peak current, Pulse type
Є в наявності
sku: SD710-9R5A
Є в наявності
23 362 UAH
Brand: Veichi
Series: SD710
Power: 2.0 kW
servo_type: servoset
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Сергій К.
Взяв цей сервопривід Veichi SD710 на 2 кВт для апгрейду свого фрезера ЧПУ. В майстерні в мене лише однофазна мережа 220В, і цей сервак ідеально підійшов. Думав, що з такою потужністю будуть проблеми, але ні, працює стабільно. Керування по імпульсах, як у всіх, до чого звик. Точність радує, 17/23-бітний енкодер дає дуже чистий рух осям. Приємно здивували його компактні розміри – легко вписався в стару шафу. Від Veichi вже маю частотники, тож якість плат з лаком і стабільну роботу на наших мережах вже знаю. Верстат тепер зовсім по-іншому себе веде.
To leave a review, please, log in.
This page contains information about
Economic servo drive 2.0kW, 220V three-phase, 9.5A rated/23.8A peak current, Pulse type ( SD710-9R5A )
with a detailed description of the technical characteristics
.
You can download
documentation for SD710-9R5A, series SD710 from manufacturer Veichi
.
Buy SD7109R5A
and seek technical advice.
Our Engineers will help you choose and buy
SD710-9R5A only high quality at affordable prices. Guarantee.
SD710-9R5A
