SD700-7R6A-SA Servo drive 1.5kW 220V 7.6A Standard

Є в наявності
sku: SD700-7R6A-SA
SD700-7R6A-SA Servo drive 1.5kW 220V 7.6A Standard
Клікніть для збільшення
Veichi
Є в наявності
25 992 UAH
Brand: Veichi
Series: SD700
Power: 1.5 kW
servo_type: servoset

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Зацікавив товар?
    Наш продавець проконсультує Вас.
  • Characteristics
  • Documentation
  • Reviews (1)
Brand Veichi
Series SD700
sku SD700-7R6A-SA
Power 1.5 kW
Current 7.60 A
Number of phases/input voltage 1-ф/220В V
DI 8
AI 2
DO 4
AO 2
Encoder resolution 17/23-bit
Structure Standard type
Dimensions V
servo_type servoset
Video Thumbnail
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

UA Ukrainian

SD700 technical document

veichi-solution-for-machine-tool-industry_uk.pdf

UA PDF 10.01 MB
Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to Guide Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty... Go to
Product Reviews
1
�
Олег П., Власник майстерні
★ ★ ★ ★ ★
02.12.2025

Взяв цей сервопривід Veichi SD700-7R6A-SA на 1.5 кВт для заміни старого на фрезерному ЧПУ. Працює від однофазної мережі 220В, що для моєї майстерні критично. Дуже сподобалось, як швидко його вдалось налаштувати, хоча до цього з Veichi справи не мав. Точність з енкодером 23 біти – просто супер, верстат тепер відпрацьовує всі команди ідеально. Плюс Veichi завжди радує ціною, за таку якість це дуже вигідно. Реально відчутна різниця в роботі, всі осі тепер крутяться плавно і без ривків.

This page contains information about Servo drive 1.5kW 220V 7.6A Standard ( SD700-7R6A-SA ) with a detailed description of the technical characteristics . You can download documentation for SD700-7R6A-SA, series SD700 from manufacturer Veichi . Buy SD7007R6ASA and seek technical advice. Our Engineers will help you choose and buy SD700-7R6A-SA only high quality at affordable prices. Guarantee. SD700-7R6A-SA