Skip to content

SD700-5R5A-PA Servo drive 1.0kW 220V 5.5A Pulse

Є в наявності
sku: SD700-5R5A-PA
SD700-5R5A-PA Servo drive 1.0kW 220V 5.5A Pulse
Клікніть для збільшення
Veichi
Є в наявності
19 237 UAH
Brand: Veichi
Series: SD700
Power: 1.0 kW
servo_type: servoset

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Зацікавив товар?
    Наш продавець проконсультує Вас.
  • Characteristics
  • Documentation
  • Reviews (2)
Brand Veichi
Series SD700
sku SD700-5R5A-PA
Power 1.0 kW
Current 5.50 A
Number of phases/input voltage 1-ф/220В V
DI 8
AI 2
DO 4
AO 2
Encoder resolution 17/23-bit
Structure Pulse type
Dimensions V
servo_type servoset
Video Thumbnail
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to Guide Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty... Go to
Product Reviews
2
5 1
4 1
3 0
2 0
1 0
Олег В.
21.01.2025

Придбав цей сервопривід Veichi SD700 для свого токарного верстата. Досить компактний, місце в шафі знайшлося швидко. Верстат тепер працює помітно стабільніше і точніше, особливо на малих обертах. Споживає небагато, всього 1кВт, від звичайної мережі 220В. Доставка була швидка, а при налаштуванні хлопці з магазину допомогли по телефону, пояснили все як для чайника) Вже тиждень працює, політ норм

Сергій, інженер ЧПУ
26.11.2024

Брали цей Veichi SD700 на модернізацію невеликого фрезера з ЧПУ. Потужності в 1 кВт якраз вистачає, 1-фазне підключення на 220В зручне для нашої мережі. Порадувала роздільна здатність енкодера – 17/23 біт це дуже круто для точності позиціонування. Протокол імпульсного типу теж без проблем інтегрується з нашим контролером. Наявність 8 дискретних входів і 4 виходів, а також 2 аналогових входів/виходів дає достатньо гнучкості для підключення датчиків та керуючих сигналів. Veichi, як завжди, порадував своєю стабільністю та якістю схемотехніки. Навіть при не дуже стабільній напрузі в мережі тримає параметри, це для нас важливо.

This page contains information about Servo drive 1.0kW 220V 5.5A Pulse ( SD700-5R5A-PA ) with a detailed description of the technical characteristics . You can download documentation for SD700-5R5A-PA, series SD700 from manufacturer Veichi . Buy SD7005R5APA and seek technical advice. Our Engineers will help you choose and buy SD700-5R5A-PA only high quality at affordable prices. Guarantee. SD700-5R5A-PA