Skip to content

SD700-500D-SA Servo drive 22kW 380V 50A Standard 17/23-bit

Є в наявності
SD700-500D-SA Servo drive 22kW 380V 50A Standard 17/23-bit
Клікніть для збільшення
Veichi
Є в наявності
112 735 UAH
Brand: Veichi
Series: SD700
Power: 22.0 kW
Servo type: Servo drive

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Interested in this product?
    Our specialist will advise you.
  • Write ⤵
    Telegram VIA TELEGRAM
    Write ⤵
    Viber VIA VIBER
  • Characteristics
  • Description
  • Documentation
  • Reviews (2)
Brand Veichi
Series SD700
SKU SD700-500D-SA
Power 22.0 kW
Current 50.00 A
Number of phases/input voltage 3-ф/380 V
Voltage 380 V
DI 8
AI 2
DO 4
AO 2
Encoder resolution 17/23-bit
Structure Standard type
Dimensions F
Servo type Servo drive
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing Delta VFD-EL with Veichi AC10: Migration Guide An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai... Go to Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to
Product Reviews
2
5 1
4 1
3 0
2 0
1 0
О
Олег, власник цеху
★ ★ ★ ★ ★
17.09.2025

We installed this Veichi 22kW servo drive on our packaging line. Now the machine runs much more stably, starts and stops are smooth, without jerks. The guys who did the installation said the drive is good and they figured it out easily. It's clear that Veichi makes quality equipment. Everything is ok)

А
Андрій
★ ★ ★ ★ ★
12.09.2025

Bought this Veichi SD700-500D-SA servo drive for retrofitting a CNC milling machine. The 22 kW power is more than enough, works from 380V without issues. The 17/23-bit encoder resolution gives very good positioning accuracy, which is critical for a mill. No integration problems arose, the protocol is standard. This is not my first time working with Veichi, they really prove to be reliable drives, their circuitry is fine. A very worthy alternative to more expensive servos.

This page contains information about Servo drive 22kW 380V 50A Standard 17/23-bit ( SD700-500D-SA ) with a detailed description of the technical characteristics . You can download documentation for SD700-500D-SA, series SD700 from manufacturer Veichi . Buy SD700500DSA and seek technical advice. Our Engineers will help you choose and buy SD700-500D-SA only high quality at affordable prices. Guarantee. SD700-500D-SA