SD700-1R8A-EA Servo drive 0.2kW 220V 1.8A EtherCAT
Є в наявності
Є в наявності
21 790 UAH
Brand: Veichi
Series: SD700
Power: 0.2 kW
Servo type: Servo drive
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Interested in this product?
Our specialist will advise you.
- Characteristics
- Description
- Documentation
- Reviews (1)
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing Delta VFD-EL with Veichi AC10: Migration Guide
An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai...
Go to
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
В
Володимир
we took this Veichi SD700 servo drive to upgrade one of our small CNC milling machines. 0.2 kW is of course not for heavy loads, but for precision work — just what is needed. The EtherCAT was a surprise, setup went without any dancing around with a tambourine, everything synchronized quickly. The positioning accuracy became noticeably better, the 17/23-bit encoder does its job. For a 220V single-phase grid it is simply a find, didn't have to bother with redoing the electrical setup in the workshop. Veichi, as always, pleased with the price-to-capabilities ratio. now the CNC machine works like clockwork)
To leave a review, please, log in.
This page contains information about
Servo drive 0.2kW 220V 1.8A EtherCAT ( SD700-1R8A-EA )
with a detailed description of the technical characteristics
.
You can download
documentation for SD700-1R8A-EA, series SD700 from manufacturer Veichi
.
Buy SD7001R8AEA
and seek technical advice.
Our Engineers will help you choose and buy
SD700-1R8A-EA only high quality at affordable prices. Guarantee.
SD700-1R8A-EA