SD600A-T3-4R5 SD600 4.5KW
Є в наявності
Є в наявності
18 302 UAH
Brand: Veichi
Series: SD600
Power: 4.5 kW
Servo type: Servo drive
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Interested in this product?
Our specialist will advise you.
- Characteristics
- Description
- Documentation
- Reviews (1)
| Brand | Veichi |
| Series | SD600 |
| SKU | SD600A-T3-4R5 |
| Power | 4.5 kW |
| Current | 10.80 A |
| Number of phases/input voltage | 3-ф/380 V |
| Voltage | 380 V |
| DI | 9 |
| AI | 2 |
| DO | 6 |
| AO | 0 |
| Encoder resolution | 2500 имп/об |
| Structure | RS-485 |
| rezistor | Встроенный |
| Dimensions | 206+75х103х245 |
| Programming | VeichiSoft |
| Servo motor | {'SMM18-3Y4R4-U1NH5'} |
| revs | 1500 |
| Servo type | Servo drive |
Documents by language
Ukrainian / English / Russian
EN English
UA Ukrainian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing Delta VFD-EL with Veichi AC10: Migration Guide
An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai...
Go to
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
О
Олег П.
We took this Veichi SD600 servo drive for a CNC milling machine we are upgrading. The 4.5 kW power is just enough for our axis, it works stably. The 2500-pulse encoder provides very decent accuracy, which is especially noticeable on small parts. Everything connected without issues using VeichiSoft, we linked it to the controller via RS-485. The built-in resistor is also a plus, no need to rig anything up separately. For the money, this is a super option, considering how Veichi's quality has improved lately, almost like Delta. Its dimensions are quite compact, it fit into the cabinet normally.
To leave a review, please, log in.
This page contains information about
SD600 4.5KW ( SD600A-T3-4R5 )
with a detailed description of the technical characteristics
.
You can download
documentation for SD600A-T3-4R5, series SD600 from manufacturer Veichi
.
Buy SD600AT34R5
and seek technical advice.
Our Engineers will help you choose and buy
SD600A-T3-4R5 only high quality at affordable prices. Guarantee.
SD600A-T3-4R5