SD600A-T2-2R2 SD600 2.2KW
Є в наявності
sku: SD600A-T2-2R2
Є в наявності
64 454 UAH
Brand: Veichi
Series: SD600
Power: 2.2 kW
servo_type: servoset
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| Brand | Veichi |
| Series | SD600 |
| sku | SD600A-T2-2R2 |
| Power | 2.2 kW |
| Current | 12.20 A |
| Number of phases/input voltage | 3-ф/220В V |
| DI | 9 |
| AI | 2 |
| DO | 6 |
| AO | 0 |
| Encoder resolution | 2500 имп/об |
| Structure | RS-485 |
| rezistor | Встроенный |
| Dimensions | 206+75х103х245 |
| Programming | VeichiSoft |
| servomotor | SMM13-2Y2R3-U1NH5,SMM13-2U2R6-U1NH5 |
| revs | 2500/1500 |
| servo_type | servoset |
Documents by language
Ukrainian / English / Russian
EN English
UA Ukrainian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
�
Олег К.
Брав цей сервопривід Veichi SD600 на 2.2кВт для оновлення свого фрезера з ЧПУ. Ну що сказати, мотор тепер літає! Потужності вистачає з головою навіть на складні режими. Сподобалось, що тут вже вбудований резистор, не треба колхозити окремо. Роздільна здатність енкодера в 2500 імпульсів на оберт дає дуже пристойну точність, це відчутно на дрібних деталях. З налаштуванням через VeichiSoft розібрався досить швидко, там все інтуїтивно зрозуміло. А те, що він працює від 3-фаз 220В, дуже зручно для моєї майстерні. Veichi як завжди, дає гарну якість за свої гроші. Однозначно можу порадити.
To leave a review, please, log in.
This page contains information about
SD600 2.2KW ( SD600A-T2-2R2 )
with a detailed description of the technical characteristics
.
You can download
documentation for SD600A-T2-2R2, series SD600 from manufacturer Veichi
.
Buy SD600AT22R2
and seek technical advice.
Our Engineers will help you choose and buy
SD600A-T2-2R2 only high quality at affordable prices. Guarantee.
SD600A-T2-2R2
