VI30-156-CWH HMI Veichi VI30 Size 15.6 in
Є в наявності
sku: VI30-156-CWH
Є в наявності
30 710 UAH
brand: Veichi
Series: VI30
Panel type: графическая
Diagonal: 15.6 inch
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| brand | Veichi |
| Series | VI30 |
| sku | VI30-156-CWH |
| Replacement (If discontinued) | No |
| Panel type | графическая |
| Matrix type | TFT LCD |
| Diagonal | 15.6 inch |
| Chroma | 262K |
| Width | 1920 mm |
| Height | 1080 mm |
| number of ports | 3 |
| Interface | RS232, RS485, RS422 |
| Protocol | Modbus RTU/TCP |
| USB port | 1 host/1 slave USB |
| Additional | Cortex A7 multi-core 1G, 128MB Flash + 128MB DDR3, Ethernet, WiFi, DC24V, 16W, 220 cd/m² |
| Color rendering | Black |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
4.0
out of 5
1 reviews
5
0
4
1
3
0
2
0
1
0
�
Сергій К.
Взяли цю панельку Veichi VI30 на 15.6 дюймів для нового проекту на виробництві, треба було нормальний екран для операторів. Роздільна здатність 1920x1080 видно добре, не пікселить. Підключення до нашого ПЛК без проблем, тут і RS485, і Ethernet є, по Modbus все літає. Взагалі, Veichi молодці, їхнє обладнання за свої гроші працює стабільно. Процесор Cortex A7 і пам'ять 128 МБ теж відчуваються, інтерфейс не гальмує. WiFi дуже зручно для віддаленого моніторингу і налаштування. Вже не перший раз беремо їхню продукцію, поки ніяких зауважень
To leave a review, please, log in.
This page contains information about
HMI Veichi VI30 Size 15.6 in ( VI30-156-CWH )
with a detailed description of the technical characteristics
.
You can download
documentation for VI30-156-CWH, series VI30 from manufacturer Veichi
.
Buy VI30156CWH
and seek technical advice.
Our Engineers will help you choose and buy
VI30-156-CWH only high quality at affordable prices. Guarantee.
VI30-156-CWH
