Skip to content

VCS-156H-580-P 580W Monocrystalline Solar Panel

Є в наявності
VCS-156H-580-P 580W Monocrystalline Solar Panel
Клікніть для збільшення
Veichi
Є в наявності
6 298 UAH
Brand: Veichi
Seriya: VCS
Bifacial: No
Peak Power: 580W kW

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Interested in this product?
    Our specialist will advise you.
  • Write ⤵
    Telegram VIA TELEGRAM
    Write ⤵
    Viber VIA VIBER
  • Characteristics
  • Documentation
  • Reviews (2)
Brand Veichi
Seriya VCS
sku VCS-156H-580-P
Material Монокристал
Peak Power 580W kW
PV Module Efficiency 20.75%
Open circuit voltage 53.11V
Maximum power current 13.08A A
Maximum power voltage 44.35V
Short circuit current 13.84A A
Bifacial No
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing Delta VFD-EL with Veichi AC10: Migration Guide An engineering guide for retrofitting industrial systems by replacing obsolete Delta VFD-EL frequency inverters with modern Veichi AC10 drives. Contai... Go to Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to
Product Reviews
2
5 1
4 1
3 0
2 0
1 0
І
Ігор, монтажник СЕС
★ ★ ★ ★ ★
22.10.2024

I have been working with Veichi VCS-156H-580-P panels for more than a year. This monocrystalline 580W model has proven itself well. The 20.75% efficiency for such power is normal. The current and voltage parameters (13.08A, 44.35V) are standard, it connects easily. Reliable panels, I often take them for a solar power plant.

С
Сергій К.
★ ★ ★ ★ ★
10.10.2024

I installed this Veichi 580W panel on my roof. It works well, I can already see the savings. I thought it would be difficult, but everything is ok. Monocrystal, just as I wanted. Recommended

This page contains information about 580W Monocrystalline Solar Panel ( VCS-156H-580-P ) with a detailed description of the technical characteristics . You can download documentation for VCS-156H-580-P, series VCS from manufacturer Veichi . Buy VCS156H580P and seek technical advice. Our Engineers will help you choose and buy VCS-156H-580-P only high quality at affordable prices. Guarantee. VCS-156H-580-P