VC1S-0808MAR Veichi VC1S-0808MAR PLC: 8 inputs / 6 outputs, relay outputs, 220VAC supply, RS232/485.
Є в наявності
sku: VC1S-0808MAR
Є в наявності
3 436 UAH
brand: Veichi
Series: VC1S
module type: PLC
supply_voltage:
output_type:
Interface: RS232/485
Number of inputs: 8
Relay outputs: 6
USB port:
Number of digital outputs:
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Veichi |
| Series | VC1S |
| module type | PLC |
| sku | VC1S-0808MAR |
| supply_voltage_V | 220VAC |
| Number of inputs | 8 |
| Number of digital inputs | 8 |
| Number of outputs | 6 |
| Relay outputs | 6 |
| Type of digital outputs | Relay |
| Number of ports | 2 |
| Interface | RS232/485 |
| Note | Source EN: VC1S CPU, 8 input, 6 replay output, standard 2 serial port,AC220V;RoHS |
Documents by language
Ukrainian / English / Russian
DOC Other
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
SIMILAR VC1S-0808MAR GOODS
| Characteristics | ||
|---|---|---|
| brand | Schneider Electric | Mitsubishi Electric |
| Series | SR2 | L |
| module type | PLC | PLC |
| supply_voltage | - | - |
| output_type | - | - |
| Interface | No | RS232 #Ethernet |
| Number of inputs | 6 | 16 |
| Relay outputs | - | - |
| USB port | - | - |
| Number of digital outputs | 4 | 8 |
| high_speed_outputs | - | - |
This page contains information about
Veichi VC1S-0808MAR PLC: 8 inputs / 6 outputs, relay outputs, 220VAC supply, RS232/485. ( VC1S-0808MAR )
with a detailed description of the technical characteristics
.
You can download
documentation for VC1S-0808MAR, series VC1S from manufacturer Veichi
.
Buy VC1S0808MAR
and seek technical advice.
Our Engineers will help you choose and buy
VC1S-0808MAR only high quality at affordable prices. Guarantee.
VC1S-0808MAR
