Skip to content

VC1-1614MDT Veichi VC1-1614MDT PLC: 16 inputs / 14 outputs, transistor outputs, 24VDC supply, RS232/485.

Є в наявності
sku: VC1-1614MDT
VC1-1614MDT Veichi VC1-1614MDT PLC: 16 inputs / 14 outputs, transistor outputs, 24VDC supply, RS232/485.
Клікніть для збільшення
Veichi
Є в наявності
5 815 UAH
brand: Veichi
Series: VC1
module type: PLC
supply_voltage:
output_type:
Interface: RS232/485
Number of inputs: 16
Relay outputs:
USB port:
Number of digital outputs: 14
high_speed_outputs:

delivery-iconDelivery and payment methods

  • Nova Poshta OfficeBy Nova Poshta to a branch or courier to the address
  • OplataBank transfer payment

delivery-iconService and Warranty

  • 24-month Warranty
  • Product return within 14 days
  • Official Service Center

delivery-iconTechnical support

  • Help with setup and selection
  • Зацікавив товар?
    Наш продавець проконсультує Вас.
  • Characteristics
  • Documentation
  • Reviews (0)
brand Veichi
Series VC1
module type PLC
sku VC1-1614MDT
supply_voltage_V 24VDC
Number of inputs 16
Number of digital inputs 16
Number of outputs 14
Number of digital outputs 14
Type of digital outputs Transistor
Number of ports 2
Interface RS232/485
Note Source EN: VC1 CPU, DC24V, 16 input, 14 transistor output (with three 100KHz pulse output), standard 2 serial port,RoHS.
Video Thumbnail
Video Thumbnail
Video Thumbnail
Documents by language

Ukrainian / English / Russian

Chastotnik.ua

Practical setup guides

Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.

Guide Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w... Go to Guide COM or GND: why the buttons do not work on a Veichi VFD A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n... Go to Guide PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p... Go to Guide VFD grounding and stray voltage on the enclosure (PE, >5V) A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta... Go to Guide Shielding a 4-20mA sensor: which end to ground, 15 cm separation A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate... Go to Guide Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty... Go to
Product Reviews

No reviews yet. Be the first!

SIMILAR VC1-1614MDT GOODS

Characteristics
brandSchneider ElectricMitsubishi Electric
SeriesSR2L
module typePLCPLC
supply_voltage--
output_type--
InterfaceNoRS232 #Ethernet
Number of inputs616
Relay outputs--
USB port--
Number of digital outputs48
high_speed_outputs--
This page contains information about Veichi VC1-1614MDT PLC: 16 inputs / 14 outputs, transistor outputs, 24VDC supply, RS232/485. ( VC1-1614MDT ) with a detailed description of the technical characteristics . You can download documentation for VC1-1614MDT, series VC1 from manufacturer Veichi . Buy VC11614MDT and seek technical advice. Our Engineers will help you choose and buy VC1-1614MDT only high quality at affordable prices. Guarantee. VC1-1614MDT