132L6115 — iC2 rated 2.2 kW, single-phase 220 V. Within the iC2 range this is a compact frame — it covers everyday jobs without paying for the larger VLT features.
Typical applications:
A booster or drainage pump on a private site
A supply fan in a small AHU
A packaging machine or short conveyor
Note: single-phase 220 V model — used where there is no three-phase supply: private boreholes, workshops, farms.
Danfoss iC2 — a compact drive for everyday jobs
The iC2 (factory name iC2-Micro) is the successor to the old VLT Micro Drive FC51. If you need a dependable drive for a pump, fan, conveyor or small machine in the 0.7–22 kW range without extra frills, this is it. We fit the iC2 where the customer does not need the fieldbus options and redundancy of an FC302, but still wants Danfoss-grade lifetime and a smooth start.
What the iC2 is good for
Pumps and boosting (0.7–7.5 kW): boreholes, circulation, drainage. The built-in PID holds pressure without a separate controller.
Conveyors and simple machinery (3–22 kW): belts, mixers, feeders. 150% overload covers a loaded start.
What we have learned in the field
iC2 boards ship with conformal coating against corrosive gases (IEC 60721-3-3) as standard — in damp pump rooms and on livestock farms this removes about half the failures we used to see on the FC51. The drive runs at 50 °C with no derating, so a tight cabinet without air conditioning is fine. It drives both induction and PM motors (IPM/SPM), which is rare in this class. Modbus RTU, a brake chopper and a potentiometer are already built in, so there is nothing extra to buy.
Parameter
iC2
Veichi AC10
INVT GD10
Range
0.7–22 kW
0.4–7.5 kW
0.2–2.2 kW
Coated boards
standard
option
option
PM motors
yes
partly
no
Running at 50 °C
no derating
with derating
with derating
On lifetime and board protection the iC2 beats all three. If budget is tight and the job is simple, an AC10 or GD10 costs less — but on corrosive sites we still recommend the iC2.
Dynamic positioning, axis synchronisation, full torque at zero speed — that is FC302 territory.
Power above 22 kW — the iC2 simply does not go there; choose an FC301 or FC302.
Our experience with the iC2
The iC2 quickly became our workhorse among compact Danfoss drives — most go to low-power pumps and ventilation. The sizing question is almost always the same: single-phase or three-phase input. The 0.7–2.2 kW ratings offer both; above that, three-phase only. Call us if you are unsure. The rest of our frequency inverters are in the catalogue.
Ставили цей частотник Danfoss ic2 2.2кВт для вентиляції на невеликому об'єкті. головне було, що є 1-фазний вхід, а видає він три фази, для нашого движка саме те. Досить компактний, в шафу вліз без проблем, розміри 230х410х242 мм норм. Подобається, що тут вже є вбудований ЕМС фільтр, не треба городить окремо. Ще приємно здивував вбудований модуль гальмування, це плюс для деяких задач. А так, Danfoss завжди надійний, працює стабільно, без зайвих питань. Підключив, налаштував базові параметри по U/f, і все поїхало. до речі, є ще й вбудований ПЛК, якщо треба якусь просту логіку зашити, дуже зручно)
This page contains information about
Variable Frequency Drive ic2 2.2kW 1-ф/220 ( 132L6115 )
with a detailed description of the technical characteristics
.
You can download
documentation for 132L6115, series ic2 from manufacturer Danfoss
.
Buy 132L6115
and seek technical advice.
Our Engineers will help you choose and buy
132L6115 only high quality at affordable prices. Guarantee.
132L6115
Subscribe to our email newsletter for discounts
We use cookies for analytics and to improve the website. Privacy Policy
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
Technical support
