KINCO-K332-02IV Kinco K332 Series Analog Output Module
Є в наявності
sku: KINCO-K332-02IV
Є в наявності
9 617 UAH
brand: Kinco
Series: K
module type: EXT
supply_voltage:
output_type:
Interface:
Number of inputs: No
Relay outputs:
USB port:
Number of digital outputs:
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| brand | Kinco |
| Series | K |
| module type | EXT |
| sku | KINCO-K332-02IV |
| supply_voltage_V | 24DC |
| Number of inputs | No |
| Number of digital inputs | No |
| Input voltage | 24DC |
| Type of discrete input signals | No |
| Number of analog inputs | No |
| Type of analog inputs | No |
| Number of outputs | No |
| Number of analog outputs | 2 |
| Type of analog outputs | 0-20mA #-10V~+10V |
Documents by language
Ukrainian / English / Russian
RU Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Андрій П.
Брав цей модуль Kinco K332-02IV для розширення нашого ПЛК на новій лінії. Треба було керувати двома аналоговими клапанами, тому 2 виходи якраз підійшли. Що добре, так це що він і 0-20мА підтримує, і +/-10В, універсально вийшло. Живиться від 24В DC, стандарт, ніяких сюрпризів. Монтаж простий, клемники зручні, в шафі місця багато не зайняв. Для своєї ціни варіант норм, Kinco взагалі по бюджетних рішеннях завжди радує. Інтегрував швидко, все одразу запрацювало без танців з бубном.
To leave a review, please, log in.
SIMILAR KINCO-K332-02IV GOODS
| Characteristics | |||
|---|---|---|---|
| brand | Mitsubishi Electric | Delta Electronics | Schneider Electric |
| Series | L | AS | SR3 |
| module type | EXT | EXT | EXT |
| supply_voltage | - | - | - |
| output_type | - | - | - |
| Interface | No | No | No |
| Number of inputs | No | 8 | 4 |
| Relay outputs | - | - | - |
| USB port | - | - | - |
| Number of digital outputs | - | - | 2 |
| high_speed_outputs | - | - | - |
This page contains information about
Kinco K332 Series Analog Output Module ( KINCO-K332-02IV )
with a detailed description of the technical characteristics
.
You can download
documentation for KINCO-K332-02IV, series K from manufacturer Kinco
.
Buy KINCOK33202IV
and seek technical advice.
Our Engineers will help you choose and buy
KINCO-K332-02IV only high quality at affordable prices. Guarantee.
KINCO-K332-02IV
