KINCO-K321-08DX Kinco K321 Series Digital Input Module
Є в наявності
sku: KINCO-K321-08DX
Є в наявності
3 076 UAH
brand: Kinco
Series: K
module type: EXT
supply_voltage:
output_type:
Interface:
Number of inputs: 8
Relay outputs:
USB port:
Number of digital outputs:
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (2)
Documents by language
Ukrainian / English / Russian
RU Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
2
Overall rating
4.5
out of 5
2 reviews
5
1
4
1
3
0
2
0
1
0
�
Юлія С.
Замовляли модуль KINCO K321-08DX для розширення системи. Потрібно було докупити входи до вже наявного обладнання на виробництві. Менеджер chastotnik.ua швидко допоміг з підбором, підтвердили сумісність. Оплатили по безготівці, відвантажили оперативно, всі документи в порядку.
�
Олександр Іванович
Брали цей модуль розширення для нашого контролера Kinco K-серії. Треба було додати дискретних входів для нових датчиків на конвеєрній лінії. Працює стабільно, без нарікань. Входи на 24В, як і потрібно було. За свої гроші дуже непоганий варіант, тим більше для вже існуючої системи Kinco.
To leave a review, please, log in.
SIMILAR KINCO-K321-08DX GOODS
| Characteristics | |||
|---|---|---|---|
| brand | Mitsubishi Electric | Delta Electronics | Schneider Electric |
| Series | L | AS | SR3 |
| module type | EXT | EXT | EXT |
| supply_voltage | - | - | - |
| output_type | - | - | - |
| Interface | No | No | No |
| Number of inputs | No | 8 | 4 |
| Relay outputs | - | - | - |
| USB port | - | - | - |
| Number of digital outputs | - | - | 2 |
| high_speed_outputs | - | - | - |
This page contains information about
Kinco K321 Series Digital Input Module ( KINCO-K321-08DX )
with a detailed description of the technical characteristics
.
You can download
documentation for KINCO-K321-08DX, series K from manufacturer Kinco
.
Buy KINCOK32108DX
and seek technical advice.
Our Engineers will help you choose and buy
KINCO-K321-08DX only high quality at affordable prices. Guarantee.
KINCO-K321-08DX
