FBs-CBE Fatek FBs-CBE — Ethernet 10 Base T communication board
Є в наявності
sku: FBs-CBE
Є в наявності
4 787 UAH
brand: Fatek
Series: FBs-Communication
module type: COM
supply_voltage:
output_type:
Interface: Ethernet 10BaseT
Number of inputs:
Relay outputs:
USB port: No
Number of digital outputs:
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Fatek |
| Series | FBs-Communication |
| module type | COM |
| sku | FBs-CBE |
| Number of ports | 1 |
| Interface | Ethernet 10BaseT |
| USB port | No |
| Note | Комунікаційна плата Ethernet 10 Base T; 9.6 K – 230.2 Kbps. |
| Accession | No |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
SIMILAR FBs-CBE GOODS
| Characteristics | |||||
|---|---|---|---|---|---|
| brand | Delta Electronics | Schneider Electric | Siemens | Siemens | Delta Electronics |
| Series | AS | SR3 | S7-1200 | S7-1200 | AS |
| module type | COM | COM | COM | COM | COM |
| supply_voltage | - | - | - | - | - |
| output_type | - | - | - | - | - |
| Interface | RS232 | RS485 | RS232 | RS485 | RS232 |
| Number of inputs | No | No | No | ||
| Relay outputs | - | - | - | - | - |
| USB port | - | - | - | - | - |
| Number of digital outputs | - | - | - | - | - |
| high_speed_outputs | - | - | - | - | - |
This page contains information about
Fatek FBs-CBE — Ethernet 10 Base T communication board ( FBs-CBE )
with a detailed description of the technical characteristics
.
You can download
documentation for FBs-CBE, series FBs-Communication from manufacturer Fatek
.
Buy FBsCBE
and seek technical advice.
Our Engineers will help you choose and buy
FBs-CBE only high quality at affordable prices. Guarantee.
FBs-CBE
