FBs-6TC Fatek FBs-6TC — thermocouple module, 6 channels
Є в наявності
sku: FBs-6TC
Є в наявності
9 574 UAH
brand: Fatek
Series: FBs-Extension
module type: EXT
supply_voltage:
output_type:
Interface:
Number of inputs:
Relay outputs:
USB port: No
Number of digital outputs:
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Fatek |
| Series | FBs-Extension |
| module type | EXT |
| sku | FBs-6TC |
| supply_voltage_V | 24VDC |
| Number of analog inputs | 6 |
| Type of analog inputs | Thermocouple 0.1C |
| USB port | No |
| Note | 6-канальний модуль термопар FBs. |
| Accession | No |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
SIMILAR FBs-6TC GOODS
| Characteristics | |||||
|---|---|---|---|---|---|
| brand | Delta Electronics | Mitsubishi Electric | Schneider Electric | Siemens | Siemens |
| Series | AS | L | SR3 | LOGO-8 | LOGO-8 |
| module type | EXT | EXT | EXT | EXT | EXT |
| supply_voltage | - | - | - | - | - |
| output_type | - | - | - | - | - |
| Interface | No | No | No | ||
| Number of inputs | 8 | No | 4 | ||
| Relay outputs | - | - | - | - | - |
| USB port | - | - | - | - | - |
| Number of digital outputs | - | - | 2 | ||
| high_speed_outputs | - | - | - | - | - |
This page contains information about
Fatek FBs-6TC — thermocouple module, 6 channels ( FBs-6TC )
with a detailed description of the technical characteristics
.
You can download
documentation for FBs-6TC, series FBs-Extension from manufacturer Fatek
.
Buy FBs6TC
and seek technical advice.
Our Engineers will help you choose and buy
FBs-6TC only high quality at affordable prices. Guarantee.
FBs-6TC
