Calpeda1593 Surface pump Calpeda MXVL4 40-817
sku: Calpeda1593
Reference price
280 355 UAH
Manufacturer: Calpeda
Voltage: 220/380 V
Pump type: Surface pump
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| sku | Calpeda1593 |
| Series | Calpeda |
| Manufacturer | Calpeda |
| Voltage | 220/380 V |
| Power | 1,1 kW |
| Mass | 53,5 kg |
| Nipple diameter | 1 1/2 inch |
| Height | 1096 mm |
| Width | 246 mm |
| Depth | 225 mm |
| Pump type | Surface pump |
Documents by language
Ukrainian / English / Russian
RU Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
This page contains information about
Surface pump Calpeda MXVL4 40-817 ( Calpeda1593 )
with a detailed description of the technical characteristics
.
You can download
documentation for Calpeda1593, series Calpeda from manufacturer Calpeda
.
Buy Calpeda1593
and seek technical advice.
Our Engineers will help you choose and buy
Calpeda1593 only high quality at affordable prices. Guarantee.
Calpeda1593
