KINCO-K308-40AR Kinco K308 Series PLC Module
Є в наявності
sku: KINCO-K308-40AR
Є в наявності
16 490 UAH
brand: Kinco
Series: K
module type: PLC
supply_voltage:
output_type:
Interface:
Number of inputs: 24
Relay outputs:
USB port:
Number of digital outputs:
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
Documents by language
Ukrainian / English / Russian
RU Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Сергій К.
брали цей контролер Kinco K308 для невеликого проекту з автоматизації вентиляції в цеху. що скажу – за свої гроші апарат дуже пристойний. 24 дискретні входи і 16 виходів вистачило з головою. живлення 85-265АС теж зручно, універсальне. поставили, підключили 24В DC на входи, запрограмували – працює як годинник. це не Siemens, звичайно, але для простих задач Kinco – те що треба. вже не перший раз беремо їхні ПЛК, завжди адекватний цінник і надійність)
To leave a review, please, log in.
SIMILAR KINCO-K308-40AR GOODS
| Characteristics | ||
|---|---|---|
| brand | Schneider Electric | Mitsubishi Electric |
| Series | SR2 | L |
| module type | PLC | PLC |
| supply_voltage | - | - |
| output_type | - | - |
| Interface | No | RS232 #Ethernet |
| Number of inputs | 6 | 16 |
| Relay outputs | - | - |
| USB port | - | - |
| Number of digital outputs | 4 | 8 |
| high_speed_outputs | - | - |
This page contains information about
Kinco K308 Series PLC Module ( KINCO-K308-40AR )
with a detailed description of the technical characteristics
.
You can download
documentation for KINCO-K308-40AR, series K from manufacturer Kinco
.
Buy KINCOK30840AR
and seek technical advice.
Our Engineers will help you choose and buy
KINCO-K308-40AR only high quality at affordable prices. Guarantee.
KINCO-K308-40AR
