FBs-20MAR2-AC Fatek FBs-20MAR2-AC — Fatek FBs-MA PLC, relay outputs, 100-240 VAC supply
Є в наявності
sku: FBs-20MAR2-AC
Є в наявності
8 431 UAH
brand: Fatek
Series: FBs-MA
module type: PLC
supply_voltage:
output_type:
Interface: USB/RS-232
Number of inputs: 14
Relay outputs: 8
USB port: Available
Number of digital outputs: 8
high_speed_outputs:
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Fatek |
| Series | FBs-MA |
| module type | PLC |
| sku | FBs-20MAR2-AC |
| supply_voltage_V | 100-240VAC |
| Number of inputs | 14 |
| Number of digital inputs | 6 |
| Input voltage | 24VDC |
| Type of discrete input signals | PNP/NPN |
| Input frequency | 20 kHz |
| Number of outputs | 8 |
| Number of digital outputs | 8 |
| Relay outputs | 8 |
| Type of digital outputs | Relay |
| Number of ports | 1 |
| Interface | USB/RS-232 |
| USB port | Available |
| Frequency outputs | 20 kHz |
| Note | ПЛК серії FBs-MA; до 32 модулів розширення; до 3 комунікаційних портів; ModBus + Fatek protocol; 36 міс гарантії, УкрСЕПРО. |
| Accession | Available |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
SIMILAR FBs-20MAR2-AC GOODS
| Characteristics | |||||
|---|---|---|---|---|---|
| brand | Mitsubishi Electric | Schneider Electric | Siemens | Siemens | Siemens |
| Series | L | SR2 | S7-1200 | S7-1200 | S7-1200 |
| module type | PLC | PLC | PLC | PLC | PLC |
| supply_voltage | - | - | - | - | - |
| output_type | - | - | - | - | - |
| Interface | RS232 #Ethernet | No | |||
| Number of inputs | 16 | 6 | |||
| Relay outputs | - | - | - | - | - |
| USB port | - | - | - | - | - |
| Number of digital outputs | 8 | 4 | 4 | 4 | 4 |
| high_speed_outputs | - | - | - | - | - |
This page contains information about
Fatek FBs-20MAR2-AC — Fatek FBs-MA PLC, relay outputs, 100-240 VAC supply ( FBs-20MAR2-AC )
with a detailed description of the technical characteristics
.
You can download
documentation for FBs-20MAR2-AC, series FBs-MA from manufacturer Fatek
.
Buy FBs20MAR2AC
and seek technical advice.
Our Engineers will help you choose and buy
FBs-20MAR2-AC only high quality at affordable prices. Guarantee.
FBs-20MAR2-AC
