VI30-101-CEL HMI Veichi VI30 Size 10.1 in
Є в наявності
sku: VI30-101-CEL
Є в наявності
11 413 UAH
brand: Veichi
Series: VI30
Panel type: графическая
Diagonal: 10.1 inch
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Veichi |
| Series | VI30 |
| sku | VI30-101-CEL |
| Replacement (If discontinued) | No |
| Panel type | графическая |
| Matrix type | TFT LCD |
| Diagonal | 10.1 inch |
| Chroma | 65K |
| Width | 1024 mm |
| Height | 600 mm |
| number of ports | 3 |
| Interface | RS232, RS485, RS422 |
| Protocol | Modbus RTU/TCP |
| USB port | 1 host/1 slave USB |
| Additional | Cortex A7 800MHz, 64MB RAM+8MB Flash, Ethernet, DC24V, 6W, 300 cd/m² |
| Color rendering | Black |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
This page contains information about
HMI Veichi VI30 Size 10.1 in ( VI30-101-CEL )
with a detailed description of the technical characteristics
.
You can download
documentation for VI30-101-CEL, series VI30 from manufacturer Veichi
.
Buy VI30101CEL
and seek technical advice.
Our Engineers will help you choose and buy
VI30-101-CEL only high quality at affordable prices. Guarantee.
VI30-101-CEL
