SD600A-T2-1R0-N SD600 Series Curvature 1 kW
Є в наявності
sku: SD600A-T2-1R0-N
Є в наявності
63 342 UAH
Brand: Veichi
Series: SD600
Power: 1.0 kW
servo_type: servoset
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| Brand | Veichi |
| Series | SD600 |
| sku | SD600A-T2-1R0-N |
| Power | 1.0 kW |
| Current | 6.30 A |
| Number of phases/input voltage | 3-ф/220В V |
| DI | 9 |
| AI | 2 |
| DO | 6 |
| AO | 0 |
| Encoder resolution | 2500 имп/об |
| Structure | RS-485, САNopen |
| rezistor | Встроенный |
| Dimensions | 189.5+75х90х165 |
| Programming | VeichiSoft |
| servomotor | SMM08-2T1R0-U1NL5,SMM13-2U1R0-U1NH5,SMM13-2L1R0-U1NH5,SMM13-2U1R3-U1NH5,SMM11-2S1R2-U1NH,,SMM11-2T1R2-U1NH |
| revs | 3000/2500/1000 |
| servo_type | servoset |
Documents by language
Ukrainian / English / Russian
EN English
UA Ukrainian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Сергій К.
Купував сервопривід Veichi SD600A на 1кВт для оновлення свого ЧПУ-фрезера. Що сказати, це небо і земля порівняно зі старим. Підключив його на 3 фази 220В, все працює як годинник. Оберти 3000 тримає впевнено, енкодер на 2500 імпульсів дає дуже класну точність, на обробці це одразу видно. Особливо сподобався вбудований гальмівний резистор, не треба морочитись з окремим монтажем. Компактний, в шафу вліз без проблем. Програмка VeichiSoft зрозуміла, швидко налаштував. За такі гроші краще не знайти, як на мене
To leave a review, please, log in.
This page contains information about
SD600 Series Curvature 1 kW ( SD600A-T2-1R0-N )
with a detailed description of the technical characteristics
.
You can download
documentation for SD600A-T2-1R0-N, series SD600 from manufacturer Veichi
.
Buy SD600AT21R0N
and seek technical advice.
Our Engineers will help you choose and buy
SD600A-T2-1R0-N only high quality at affordable prices. Guarantee.
SD600A-T2-1R0-N
