VHT-50K-100-H 50kW Hybrid Solar Inverter
Є в наявності
sku: VHT-50K-100-H
Є в наявності
599 735 UAH
Brand: Veichi
Series: VH
Power supply: 3x380
Power: 50.0 kW
Battery Voltage: 750 V
Max Charge Current: 100 A
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Description
- Documentation
- Reviews (1)
| Brand | Veichi |
| Series | VH |
| SKU | VHT-50K-100-H |
| Type | hybrid_inverter |
| Power | 50.0 kW |
| Power supply | 3x380 |
| Battery Voltage | 750 V |
| Battery Voltage Range | 135-750 V |
| Max Charge Current | 100 A |
| Charger Type | MPPT |
| Nominal DC Voltage | 620 V |
| Max DC Voltage | 1000 V |
| MPPT Voltage Range | 200-850 V |
| Output Voltage Range | 3L/N/PE;220/380V;230/400V;240/415V V |
| Efficiency | 98.8 % |
| Dimensions | 800x620x300 mm |
| Weight | 72.0 kg |
| AC Startup Voltage | 135 V |
| AC Input Voltage Range | 220/380V;230/400V;240/415V V |
| Frequency Range | 50/60 Hz |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Олег Петренко
Давно шукали надійний гібридник для нашого об'єкта, де потрібно 50 кВт і три фази. Зупинилися на Veichi VHT-50K-100-H. Що сказати, інвертор справді хороший. Показники ефективності в 98.8% не просто цифри на папері, він реально видає високий ККД. МРРТ контролер відмінно працює з масивом панелей, вижимає максимум. Порадувала підтримка широкого діапазону напруг для акумів, гнучкість налаштувань. І те, що він IP65, для нашої експлуатації на вулиці це прям must-have. В цілому, за такі гроші отримати таке рішення – це дуже вдала інвестиція. Veichi завжди радує, що в частотниках, що тут.
To leave a review, please, log in.
This page contains information about
50kW Hybrid Solar Inverter ( VHT-50K-100-H )
with a detailed description of the technical characteristics
.
You can download
documentation for VHT-50K-100-H, series VH from manufacturer Veichi
.
Buy VHT50K100H
and seek technical advice.
Our Engineers will help you choose and buy
VHT-50K-100-H only high quality at affordable prices. Guarantee.
VHT-50K-100-H