Selection by parameters

Delta Power Supplies

Found 64 goods
Delta Electronics ×
Скинути фільтри

Delta Electronics power supplies are industrial DC sources for automation and control cabinets in two form factors: DIN-rail and panel/enclosed. They share a universal 85-264 V input, 5, 12, 24 and 48 V rails, and overload, short-circuit and over-temperature protection; several series add active PFC, and DRP also offers a three-phase 340-550 V version.

  • DRL (Lyte) — DIN-rail units, 75-480 W, the baseline line for PLCs, sensors and relays.
  • DRM (CliQ-M) — DIN-rail units with PFC, 120-960 W at 24 V, for high-power loaded nodes.
  • DRP (CliQ) — DIN-rail units with PFC, 30-960 W, single-phase 85-264 V and three-phase 340-550 V for three-phase cabinets.
  • PMC — panel units, 35-600 W (12/24/48 V), for dense panel mounting.
  • PMT — panel and enclosed units, 35-350 W, including a 5 V version, a broad choice for varied tasks.
  • PMU — DIN-rail DC-UPS, 155 W (12/24 V), for uninterrupted power to critical nodes.

Need a single- or three-phase input, PFC, or DC-UPS backup — we will match the Delta series to your cabinet.

Frequently Asked Questions

How do the Delta DRL, DRP and DRM series differ?

DRL (Lyte) is the base DIN line, 75–480 W at 12/24/48 V for typical cabinets. DRP (CliQ) covers a wider 30–960 W with models that add active PFC and three-phase input (DRP…3BN). DRM (CliQ-M) is high-power modules, 120–960 W at 24 V with PFC for loaded nodes. DRL suits most cabinets; for heavy or three-phase use, pick DRP/DRM. The Delta range starts from UAH 714 (PMT).

Which Delta should I pick on a DIN rail for a 24V cabinet?

The base choice is DRL at 24 V (e.g. DRL-24V75W1AZ, 75 W, or DRL-24V240W1EN, 240 W). If you need active PFC or more power, take DRP or the high-power DRM (up to 960 W). All three mount in a row with breakers on a standard 35 mm rail.

Does Delta have units with three-phase input?

Yes, the DRP (CliQ) series has three-phase models — DRP…3BN, e.g. DRP024V060W3BN at 24 V or DRP048V480W1BN at 48 V. A three-phase unit loads the grid symmetrically and suits heavy racks fed from a three-phase line.

Which Delta series is for enclosed mounting and which for panel?

Enclosed — PMT, the widest line at 35–350 W on 5/12/24/48 V, when you need a compact case. Panel — PMC, 35–600 W for panel mounting. PMT is often chosen as an economical alternative to a DIN unit of the same power.

What is the Delta PMU series with special voltages for?

PMU delivers non-standard voltages of 13.8 and 27.6 V (151 W, panel mount) — voltages for float-charging batteries and telecom equipment. If you specifically need backup-battery charging or powering a telecom node with trickle charge, this is the dedicated series.

Which Delta units have active PFC?

Active PFC is built into the DRP (CliQ) and DRM (CliQ-M) series. It unloads the supply grid and is often required by code on larger sites. The base DRL and enclosed PMT have no PFC and are chosen for typical nodes where correction is not critical. Genuine Delta Electronics products with warranty, shipped from stock.