ASD-M-1523-R ASD-M 1.5 kW series
Є в наявності
sku: ASD-M-1523-R
Є в наявності
1 872 UAH
Brand: Delta Electronics
Series: ASD-M
Power: 1.5 kW
servo_type: servomotor
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| Brand | Delta Electronics |
| Series | ASD-M |
| sku | ASD-M-1523-R |
| Power | 1.5 kW |
| Current | 8.30 A |
| Number of phases/input voltage | 3-ф/220В V |
| DI | 8 |
| AI | 2 |
| DO | 5 |
| AO | 2 |
| Encoder resolution | 20 бит |
| Structure | RS-232, RS-485, E-Cam, DMCNET |
| rezistor | Встроенный |
| Dimensions | 205x155x209 |
| Programming | ASDASoft |
| servomotor | ECMA-C_0807_S(S=19mm),ECMA-C_0907_S(S=16mm),ECMA-C_0910_S(S=16mm),ECMA-C_1010_S(S=22mm),ECMA-E_1310_S(S=22mm),ECMA-E_1315_S(S=22mm),ECMA-G_1309_S(S=22mm) |
| revs | 3000/2000/1000 |
| servo_type | servomotor |
Documents by language
Ukrainian / English / Russian
EN English
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
�
Олександр, власник майстерні ЧПУ
Взяв собі цей сервопривід Delta ASD-M 1.5 кВт для оновлення одного з наших фрезерів. Вже не вперше працюємо з Delta, вони завжди радують своїм співвідношенням ціни і того, що отримуєш. Підключення 3-ф/220В для нас якраз, та й 20-бітний енкодер одразу дає знати, що з точністю проблем не буде. Для ЧПУ це критично, знаєте. Дуже зручно, що резистор вже вбудований, не треба окремо нічого колхозити. Налаштували все через ASDASoft, все зрозуміло і логічно. Верстат тепер зовсім по-іншому працює, рухи чіткі, без ривків. Поставив його на вісь, де раніше були проблеми з позиціонуванням, тепер все ок
To leave a review, please, log in.
This page contains information about
ASD-M 1.5 kW series ( ASD-M-1523-R )
with a detailed description of the technical characteristics
.
You can download
documentation for ASD-M-1523-R, series ASD-M from manufacturer Delta Electronics
.
Buy ASDM1523R
and seek technical advice.
Our Engineers will help you choose and buy
ASD-M-1523-R only high quality at affordable prices. Guarantee.
ASD-M-1523-R