ASD-A2-7521-E ASDA-A2 7.5KW series
Є в наявності
sku: ASD-A2-7521-E
Є в наявності
1 872 UAH
Brand: Delta Electronics
Series: ASDA-A2
Power: 7.5 kW
servo_type: servodrive
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| Brand | Delta Electronics |
| Series | ASDA-A2 |
| sku | ASD-A2-7521-E |
| Power | 7.5 kW |
| Current | 47.50 A |
| Number of phases/input voltage | 1-ф/220В V |
| DI | 8 |
| AI | 2 |
| DO | 5 |
| AO | 2 |
| Encoder resolution | 20 бит |
| Structure | RS-232, RS-485, EterCAT, E-cam |
| rezistor | Option |
| Dimensions | 205+70х136х260 |
| Programming | ASDASoft |
| servomotor | {"ECMA-F11875_3","(3"42mm)"} |
| revs | 1500 |
| servo_type | servodrive |
Documents by language
Ukrainian / English / Russian
EN English
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
�
Сергій К., інженер ЧПУ
Взяли цей Delta ASDA-A2 на 7.5 кВт для модернізації фрезерного верстата. Що сказати, привід працює як годинник. 20-бітний енкодер дає просто фантастичну точність, на обробці складних деталей це відчувається одразу. Потужності 7.5 кВт вистачає з запасом, движок крутиться рівно, без вібрацій. Налаштування через ASDASoft зрозуміле, тюнінг зайняв мінімум часу. Підключили по EtherCAT, відгук миттєвий. Для тих, хто шукає надійний сервопривід з доброю точністю – цей сервак буде відмінним вибором.
To leave a review, please, log in.
This page contains information about
ASDA-A2 7.5KW series ( ASD-A2-7521-E )
with a detailed description of the technical characteristics
.
You can download
documentation for ASD-A2-7521-E, series ASDA-A2 from manufacturer Delta Electronics
.
Buy ASDA27521E
and seek technical advice.
Our Engineers will help you choose and buy
ASD-A2-7521-E only high quality at affordable prices. Guarantee.
ASD-A2-7521-E
