ASD-A2-4521-U ASDA-A2 series 4.5KW
Є в наявності
sku: ASD-A2-4521-U
Є в наявності
24 024 UAH
Brand: Delta Electronics
Series: ASDA-A2
Power: 4.5 kW
servo_type: servodrive
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (1)
| Brand | Delta Electronics |
| Series | ASDA-A2 |
| sku | ASD-A2-4521-U |
| Power | 4.5 kW |
| Current | 32.50 A |
| Number of phases/input voltage | 1-ф/220В V |
| DI | 8 |
| AI | 2 |
| DO | 5 |
| AO | 2 |
| Encoder resolution | 20 бит |
| Structure | RS-232, RS-485, E-Cam |
| rezistor | Встроенный |
| Dimensions | 206+70х110х230 |
| Programming | ASDASoft |
| servomotor | {"ECMA-F11845_S","(S"35mm)"} |
| revs | 1500 |
| servo_type | servodrive |
Documents by language
Ukrainian / English / Russian
EN English
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
Product Reviews
1
Overall rating
5.0
out of 5
1 reviews
5
1
4
0
3
0
2
0
1
0
�
Олег П.
Взяв собі сервопривід Delta ASDA-A2 на 4.5 кВт для фрезера. Моторчик на 1500 об/хв, живлення від 220В. Що сказати, це просто бомба для ЧПУ. Точність 20 біт по енкодеру дає дуже крутий результат, люфтів немає взагалі. До цього стояв старий, але цей сервак просто літає. Підключив через RS-485 без проблем. ASDASoft для налаштування зрозумілий, пару годин і вже все працювало як треба. Вбудований резистор теж доречний. За такі гроші кращого і не знайти, Delta як завжди тримає марку
To leave a review, please, log in.
This page contains information about
ASDA-A2 series 4.5KW ( ASD-A2-4521-U )
with a detailed description of the technical characteristics
.
You can download
documentation for ASD-A2-4521-U, series ASDA-A2 from manufacturer Delta Electronics
.
Buy ASDA24521U
and seek technical advice.
Our Engineers will help you choose and buy
ASD-A2-4521-U only high quality at affordable prices. Guarantee.
ASD-A2-4521-U
