VFD055B43A Variable Frequency Drive VFD-B 5.5kW 3-ф/380
sku: VFD055B43A
Ми зрадістю підбермо Вам аналог
Професійний підбір за тел. (093) 1701425
brand: Delta Electronics
Series: VFD-B
Supply input: 3x380 V
Сurrent: 13 A
IP protection level: 20
Hybrid Power (AC/DC-Solar): Ні
Remote Control: Ні
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Delta Electronics |
| Series | VFD-B |
| sku | VFD055B43A |
| Main Power | 5.5 kW variable frequency drives |
| Supply input | 3x380 V |
| Supply output | 3x380 V |
| Mmax (1 min) | 150 % |
| Сurrent | 13 A |
| Maximum output frequency | 400 Hz |
| Product weight | 8 kg |
| IP protection level | IP20 |
| EMC filter | Available |
| Height | 323 mm |
| Width | 200 mm |
| Depth | 183 mm |
| Braking module | Available |
| Inbuilt PLC | Available |
| Built-in regulator | PID |
| Scalar control mode | Available |
| Vector control mode without encoder | Available |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
SIMILAR VFD055B43A GOODS
| Characteristics | |||||
|---|---|---|---|---|---|
| brand | Veichi | INVT | Danfoss | Schneider Electric | Mitsubishi Electric |
| Series | AC01 | GD27 | ic2 | Altivar 310 | FR-D |
| Supply input, V | 3x380 | 3x380 | 3x380 | 3x380 | 3x380 |
| Сurrent, A | 13 | 13 | 12 | 12.6 | 12 |
| IP protection level | 20 | 20 | 20 | 20 | 20 |
| Hybrid Power (AC/DC-Solar) | No | No | No | No | No |
| Remote Control | Yes | No | No | No | No |
This page contains information about
Variable Frequency Drive VFD-B 5.5kW 3-ф/380 ( VFD055B43A )
with a detailed description of the technical characteristics
.
You can download
documentation for VFD055B43A, series VFD-B from manufacturer Delta Electronics
.
Buy VFD055B43A
and seek technical advice.
Our Engineers will help you choose and buy
VFD055B43A only high quality at affordable prices. Guarantee.
VFD055B43A
