Skip to content
Selection by parameters
Series
Diagonal, inch

Operator panels Shihlin EU2000

Found 6 products
EU2000 ×
Скинути фільтри
B2B Сервіс

Shihlin Electric EU2000 Series Operator Panels

The EU2000 series from Taiwanese manufacturer Shihlin Electric is a range of graphic touchscreen operator panels (HMI) designed for building intuitive control interfaces for industrial equipment. EU2000 panels combine reliability, versatile communication capabilities, and competitive pricing, making them an optimal choice for mid-range automation tasks.

All models in the series are equipped with RS232, RS422, and RS485 ports, support the Modbus protocol, and feature USB ports in host/client configuration. Models with the "11" suffix additionally include an Ethernet port and TCP/IP protocol support for industrial network integration.

EU2000 Panel Technical Specifications

The series offers two screen sizes — 5.7 and 10.4 inches. Each size is available with a TFT matrix (65,536 colors) or an STN display (monochrome, white-blue). The comparison table below covers all available models.

EU2000 Series Model Range

Part NumberScreen SizeDisplay TypeResolutionPortsProtocols
EU206CT005.7"TFT, 65536 colors320×2402 (RS232/422/485)Modbus
EU206CT115.7"TFT, 65536 colors320×2403 (RS232/422/485 + Ethernet)Modbus, TCP/IP
EU206GS005.7"STN, monochrome320×2402 (RS232/422/485)Modbus
EU206GS115.7"STN, monochrome320×2403 (RS232/422/485 + Ethernet)Modbus, TCP/IP
EU210CT0010.4"TFT, 65536 colors800×6002 (RS232/422/485)Modbus
EU210CT1110.4"TFT, 65536 colors800×6003 (RS232/422/485 + Ethernet)Modbus, TCP/IP

EU2000 HMI Application Areas

EU2000 series panels are used for process visualization and control across various industries:

  • Machine building — displaying operating parameters and equipment diagnostics
  • Packaging lines — speed control, counters, recipe management
  • Water treatment and pumping stations — pressure, level, and flow monitoring
  • HVAC systems — climate unit control via Modbus communication
  • Small production lines — where an affordable yet functional HMI interface is required

With Modbus RTU/TCP support, EU2000 panels integrate seamlessly with Delta panels, variable frequency drives, PLCs, and other automation devices.

Other Operator Panel Series

In addition to EU2000, our catalog features a wide selection of HMI panels from leading manufacturers. Kinco panels offer enhanced capabilities for medium to large-scale projects, while Schneider Electric delivers premium quality for critical industrial facilities. Browse the complete operator panel catalog to find the optimal solution.

Warranty and Support

All Shihlin Electric EU2000 series operator panels come with an official manufacturer warranty. Our engineers can assist with model selection for your specific application, communication setup, and commissioning. Delivery available throughout Ukraine.

Frequently Asked Questions

What is the difference between an HMI panel and a PLC?

A PLC runs the automation logic, while the HMI shows the machine state and sends operator commands to the controller or VFD. If you need I/O and control logic, use a PLC. If you need a screen with buttons, alarms and setpoints, use an HMI.

Which HMI screen size should I choose for a control cabinet?

For a simple machine, 4.3-5.7 inches is usually enough. A 7-inch panel works well for pump stations, ventilation and small machines. Choose 10.1 inches or larger when the operator needs trends, recipes, alarm logs or several mimic screens.

Does an operator panel need Ethernet?

Ethernet is useful for Modbus TCP/IP, several controllers, remote service or connection to the plant network. If the panel is next to one VFD and communicates over RS-485, Modbus RTU is often enough.

Can an HMI be connected directly to a VFD?

Yes, if the VFD supports Modbus RTU or Modbus TCP and the register map is available. For Veichi drives we often check VI20 or VI30 panels because they fit Veichi-based control cabinets well.

What information is needed to replace an old operator panel?

Send the old panel part number, cutout size, supply voltage, port type, protocol and the project file if it is available. Without the project file, the screen project often has to be rebuilt.

Can you select an HMI for a specific PLC?

Yes. Send the PLC or VFD model, required screen size and communication method. We will check the ports and suggest the series that fits the project best.