AC600-T4-110G/132P Variable Frequency Drive AC600 110.0kW 3-ф/380
sku: AC600-T4-110G/132P
Ми зрадістю підбермо Вам аналог
Професійний підбір за тел. (093) 1701425
brand: Veichi
Series: AC600
Supply input: 3x380 V
Сurrent: 210 A
IP protection level: 20
Hybrid Power (AC/DC-Solar): Ні
Remote Control: Ні
Delivery and payment methods
By Nova Poshta to a branch or courier to the address
Bank transfer payment
Service and Warranty
- 24-month Warranty
- Product return within 14 days
- Official Service Center
Technical support
- Help with setup and selection
- Зацікавив товар?
Наш продавець проконсультує Вас.
- Characteristics
- Documentation
- Reviews (0)
| brand | Veichi |
| Series | AC600 |
| sku | AC600-T4-110G/132P |
| Main Power | 110.0 kW |
| In Second Power mode | 132.0 kW |
| Supply input | 3x380 V |
| Supply output | 3x380 V |
| Mmax (1 min) | 150 % |
| Сurrent | 210 A |
| Rated current for the second power | 250 A |
| Maximum output frequency | 0~599Hz Hz |
| IP protection level | IP20 |
| EMC filter | Available |
| Height | 658 mm |
| Width | 270 mm |
| Depth | 370 mm |
| Braking module | опция |
| Scalar control mode | Available |
| Vector control mode without encoder | Available |
| Linear U/f control law | Available |
Documents by language
Ukrainian / English / Russian
Chastotnik.ua
Practical setup guides
Chastotnik.ua materials for wiring and setup. These are not official manufacturer documents.
Guide
Replacing a European VFD with Veichi: NPN/PNP, PLC jumper, COM vs GND
The most common scenario when replacing a European drive (Schneider Altivar, Siemens, LS, Danfoss) with Veichi looks like this: the power section is w...
Go to
Guide
COM or GND: why the buttons do not work on a Veichi VFD
A typical picture after installation: the Veichi VFD starts from the keypad, the parameters are entered, but the external Start/Stop buttons produce n...
Go to
Guide
PLC jumper on Veichi: wiring PNP/NPN sensors and pushbuttons
On the control board of Veichi AC10 (from 7.5 kW) and AC310 three terminals sit side by side: +24V, PLC and COM. Between them is a small jumper. Its p...
Go to
Guide
VFD grounding and stray voltage on the enclosure (PE, >5V)
A fairly common complaint after installation: voltage "tingles" on the motor housing, the cabinet or the drive itself, while the keypad or sensors sta...
Go to
Guide
Shielding a 4-20mA sensor: which end to ground, 15 cm separation
A pressure or flow sensor in pump automation almost always outputs a 4-20 mA current signal. On Veichi it is wired to an analog input that can operate...
Go to
Guide
Replacing a Schneider Altivar with Veichi: step-by-step terminal and parameter migration
The power section of a Schneider Altivar and a Veichi is wired the same way: mains to R/S/T, motor to U/V/W, PE to the ground terminal. The difficulty...
Go to
SIMILAR AC600-T4-110G/132P GOODS
| Characteristics | |||||
|---|---|---|---|---|---|
| brand | INVT | Delta Electronics | Schneider Electric | Mitsubishi Electric | Danfoss |
| Series | GD20 | VFD-CP2000 | Altivar 610 | FR-F | FC-102 |
| Supply input, V | 3x380 | 3x380 | 3x380 | 3x380 | 3x380 |
| Сurrent, A | 215.0 | 220 | 0 | 216 | 212 |
| IP protection level | 20 | 20 | 20 | 20 | IP |
| Hybrid Power (AC/DC-Solar) | No | No | No | No | No |
| Remote Control | No | Yes | Yes | No | No |
This page contains information about
Variable Frequency Drive AC600 110.0kW 3-ф/380 ( AC600-T4-110G/132P )
with a detailed description of the technical characteristics
.
You can download
documentation for AC600-T4-110G/132P, series AC600 from manufacturer Veichi
.
Buy AC600T4110G/132P
and seek technical advice.
Our Engineers will help you choose and buy
AC600-T4-110G/132P only high quality at affordable prices. Guarantee.
AC600-T4-110G/132P
