AC310-T3-220G/250P-L Variable Frequency Drive AC310 | 220кВт / 250кВт 3ф/380

The frequency converter Veichi AC310-T3-220G/250P-L belongs to the AC310 series and is designed for operation in high-load industrial conditions. With a nominal power of 220 kW and a second power mode of up to 250 kW, the device ensures stable operation at significant currents with rated values up to 470 A. The built-in control modes, which include scalar and vector algorithms both with and without an encoder, guarantee accuracy and efficiency in regulation. Compatibility with RS-485/Modbus, CANopen, PROFIBUS DP, and Ethernet IP protocols ensures convenient integration with various automation systems. The application of the converter finds its place in production line control systems, where precise motor regulation is required, as well as in complex industrial-scale technological processes. The device is successfully used in automated energy system setups, where critical power supply stability and reduced energy consumption are essential. It is also utilized for speed control of pumping systems, fans, and compressors, which contributes to optimizing the operating modes of technical equipment. Due to its wide functionality, the device is applicable in energy, transportation systems, and various industrial processes where accurate adaptation to electrical loads is necessary.

Veichi AC310 — universal vector VFD for pumps, ventilation, conveyors and machine tools

We call the AC310 the all-rounder of the Veichi range, and that is from field practice, not a slogan. The series runs full vector control (scalar, sensorless vector and closed-loop with encoder), drives both asynchronous and synchronous motors, and is the one we reach for when plain V/f is not enough. If you need to hold torque, pressure or tension rather than just spin a shaft, this is the line.

Its headline feature is a built-in simple PLC (up to 16 steps) plus a PID controller. On a pump station that means the drive holds pressure on its own, with no separate controller. Modbus RTU is standard for an out-of-the-box SCADA tie-in, while Profibus, CANopen and Profinet are optional on the three-phase models.

What the AC310 is for

• Pumps and fans: built-in PID holds pressure/flow, with dedicated pump-and-fan load parameters.
• Single-phase 220 V mains: the T/S2 models run off single-phase 220 V and drive a 3-phase 220 V motor — farms, wells and workshops with no three-phase grid.
• Conveyors, mixers, machine tools: vector torque at low speed where a V/f drive sags.
• Large pump and traction sets: three-phase frames up to hundreds of kW with dual G/P rating.

How the AC310 differs from rivals

Parameter	Veichi AC310	Danfoss FC51	Delta MS300
Built-in PLC	Yes (16 steps)	No	Basic logic
Vector control	Sensorless / encoder	V/f class	Sensorless
Single-phase 220 V input	T/S2 line	Limited	Up to 2.2 kW
Fieldbus	Modbus + options	Modbus	Modbus + options

Honestly, for a simple set-and-forget fan there is no point paying for vector. But the moment you need logic, torque or a SCADA link, the AC310 works out cheaper than a basic drive plus an external controller.

When the AC310 is NOT the right choice

• A simple low-power pump or fan on a budget — the compact Veichi AC10 is cheaper.
• A 380 V motor — the single-phase T/S2 models feed 220 V motors only; you need a three-phase T3 unit.
• Dusty or wet sites — the enclosure is IP20, so it needs a cabinet.

Our experience with the AC310

This is one of our core Veichi series, with steady demand on water utilities and industrial ventilation. Two questions come up most: whether single-phase 220 V will drive a 3-phase motor (yes — that is exactly what the T/S2 models are for) and whether a pump needs a separate PLC (usually not — the built-in PID is enough). If you are unsure whether to pick a G or P frame, get in touch and we will size it to your load.