AC310-T3-185G/200P-L Variable Frequency Drive AC310 | 185кВт / 200кВт 3ф/380

The Veichi frequency inverter of the AC310 series provides a nominal power of 185 kW and a second power mode up to 200 kW, allowing it to service high-load installations. When powered by a 3-phase 380 V supply and an output voltage of 3-f/380 V, the device demonstrates high operational parameters with a rated current of 340 A and a maximum current of up to 612 A for 2 seconds. The product supports various control modes, including scalar, vector with encoder, and vector without encoder, providing flexible adjustment of operational parameters. The built-in PLC and PID, as well as the option to use ModBus RTU, RS-485, and other protocols, reduce the time for configuration and integration of equipment into automation systems. The devices can be used in production lines, energy supply systems, and technological processes where precise control of frequency and power is required. The device finds application in metallurgical and chemical enterprises where high energy loads require stable management and control. Additionally, the use of the inverter in cooling systems and transport conveyor lines demonstrates its versatility and adaptability to different operating conditions. The application of the device in construction machinery and integrated energy networks ensures reliable management of technological processes in complex automated systems.

Veichi AC310 — universal vector VFD for pumps, ventilation, conveyors and machine tools

We call the AC310 the all-rounder of the Veichi range, and that is from field practice, not a slogan. The series runs full vector control (scalar, sensorless vector and closed-loop with encoder), drives both asynchronous and synchronous motors, and is the one we reach for when plain V/f is not enough. If you need to hold torque, pressure or tension rather than just spin a shaft, this is the line.

Its headline feature is a built-in simple PLC (up to 16 steps) plus a PID controller. On a pump station that means the drive holds pressure on its own, with no separate controller. Modbus RTU is standard for an out-of-the-box SCADA tie-in, while Profibus, CANopen and Profinet are optional on the three-phase models.

What the AC310 is for

• Pumps and fans: built-in PID holds pressure/flow, with dedicated pump-and-fan load parameters.
• Single-phase 220 V mains: the T/S2 models run off single-phase 220 V and drive a 3-phase 220 V motor — farms, wells and workshops with no three-phase grid.
• Conveyors, mixers, machine tools: vector torque at low speed where a V/f drive sags.
• Large pump and traction sets: three-phase frames up to hundreds of kW with dual G/P rating.

How the AC310 differs from rivals

Parameter	Veichi AC310	Danfoss FC51	Delta MS300
Built-in PLC	Yes (16 steps)	No	Basic logic
Vector control	Sensorless / encoder	V/f class	Sensorless
Single-phase 220 V input	T/S2 line	Limited	Up to 2.2 kW
Fieldbus	Modbus + options	Modbus	Modbus + options

Honestly, for a simple set-and-forget fan there is no point paying for vector. But the moment you need logic, torque or a SCADA link, the AC310 works out cheaper than a basic drive plus an external controller.

When the AC310 is NOT the right choice

• A simple low-power pump or fan on a budget — the compact Veichi AC10 is cheaper.
• A 380 V motor — the single-phase T/S2 models feed 220 V motors only; you need a three-phase T3 unit.
• Dusty or wet sites — the enclosure is IP20, so it needs a cabinet.

Our experience with the AC310

This is one of our core Veichi series, with steady demand on water utilities and industrial ventilation. Two questions come up most: whether single-phase 220 V will drive a 3-phase motor (yes — that is exactly what the T/S2 models are for) and whether a pump needs a separate PLC (usually not — the built-in PID is enough). If you are unsure whether to pick a G or P frame, get in touch and we will size it to your load.